Example analysis
This is a sample track showing what you'll get. Design your own for free.
Overview
Track Layout
Watch your track in 3D
See the full simulation flythrough
View flythroughTrack Details
Suggested Changes
Simulation
Lap Simulation
Estimated point-mass model
3D Flythrough
Driver's eye view of your circuit
Detailed Analysis
Safety Analysis
Consider adding banking to high-speed corners for improved grip and safety
Overtaking Analysis
Simulates a car starting 1.5s behind. Slipstream on straights closes the gap; dirty air in corners opens it. Overtaking is possible when the gap drops below 0.5s at a braking zone.
No braking zones where the chaser gets close enough to attempt a pass.
The chaser can't close the gap — add longer straights to enable slipstream drafting
Higher speed differentials between straights and corners improve overtaking
Fun / Flow Analysis
Add more variety to corner radii — mix tight hairpins with fast sweepers
Link corners together with short straights to create rhythm sections
Increase the speed differential — add both slow-speed and high-speed sections
Aim for 2-7 corners per km for an engaging driving experience
Estimated Circuit Grading
Unofficial estimate for design guidance only. Not affiliated with or endorsed by the FIA.
Grade 1 (F1 / WEC)
Formula 1, WEC, MotoGP
Not met
Grade 2 (F2 / F3 / GT)
Formula 2, Formula 3, GT World Challenge
Not met
Grade 3 (National)
National championships, Formula Regional
Not met
Grade 4 (Club)
Club racing, track days, historic events
Not met
Track does not meet minimum Grade 4 requirements
Add at least 3 corners
Facilities (medical, marshalling, pit buildings, barriers, fencing) cannot be assessed from geometry alone and require on-site inspection.
This is an unofficial estimate for design guidance only. RacetrackDesign is not affiliated with or endorsed by the FIA. Actual circuit homologation requires formal FIA inspection and approval — these results do not constitute official grading.
Facilities (medical, marshalling, pit buildings, barriers, fencing) cannot be assessed from geometry alone and require on-site inspection.
AI Design Commentary
ProSign up for AI Commentary
Get expert AI analysis comparing your design to real-world circuits.
Create Free AccountLike what you see?
Get the same analysis for your own circuit design — completely free.
Want to see it from the driver's seat?
Watch an onboard flythrough of your circuit.
View 3D flythrough